How to remove a link from a watch?

Introduction: Brace Yourself, Watch Link Removal Ahead...

Removing links from a watch can be a daunting task, especially if you've never attempted it before. But fear not, my friends, for I have some tips and tricks to make this process as painless as possible. And who knows, you might even find how to remove a link from a watch to be a fun and rewarding activity. (Note: If you don't enjoy tedious tasks, you might want to skip this one).

Let's face it - Everyone has a different sized wrist. This can sometimes cause a problem when choosing a watch or a watch strap. Manufacturers have come up with different solutions, depending on the style of the strap. In many cases, the strap will have pre-cut holes, which should get you close to the size you need in most cases. Other designs will feature a wrap around strap, which can work very well. The most common time that people come into difficulty is when it is a metal strap that uses links. There is no easy way to remove or add these links right? Wrong.

Step 1: Tools

First things first, you'll need a few tools to get started. A watch link removal tool is the most common tool used for this job, but if you don't have one handy, a small screwdriver or even a pushpin can work just as well. You'll also need some patience, steady hands, and a good sense of humour. Why? Because removing watch links can be a test of one's patience and sanity.

The process is actually quite simple once you have a suitable watch link remover tool. This watch link removal kit is extremely easy to use. Please check out the instructions below:

Step 2:

Place your watch on a flat surface and locate the pins that hold the links together. These pins can be found on the side of the links, usually marked with an arrow or a small indentation.

Step 3:

Use your chosen tool to push the pin out in the direction of the arrow or indentation. Be sure to apply steady pressure and keep your hands and fingers clear of the tool to avoid any injuries. If you're using a pushpin or screwdriver, be careful not to scratch the watch or damage the pins.

Step 4:

Once the pin is out, gently pull the link away from the watch band. Repeat this process for any additional links you want to remove.

Step 5:

Reassemble the watch band by aligning the remaining links and inserting the pins back in the opposite direction you removed them. You might need to use a pair of pliers to push the pins back in place.

Conclusion:

And there you have it, a watch band that fits perfectly on your wrist. Congratulations, you're now a certified watch link removal expert! Okay, maybe not certified, but you get the idea.

In all seriousness, removing links from a watch can be a tedious task, but with a little patience and a steady hand, you can do it. And who knows, maybe you'll discover a newfound love for watch maintenance. Or maybe you'll just be happy to have a watch that fits properly. Either way, happy tinkering!

    We have them at a very affordable price on Kolooky. Click the link below:

    Watch Link Remover


    Leave a comment

    Please note, comments must be approved before they are published